HV9 & HV10 Series Aluminum Baler

Two ram construction in a single ram baler

The EXCEL® HV9 & HV10 have the revolutionary single sheet, interlocking construction found in our two-ram balers. The floor and side sheets are all single sheets, cut to fit together for indestructible construction. The HV9 & HV10 bale newspaper, office paper, magazines, OCC, PET, HDPE, aluminum cans and tin cans without preconditioning. Its extra heavy duty construction allows the HV’s to also bale painted aluminum siding, radiators, aluminum extrusion, and insulated wires.

HV9 Series Balers

  • Patented Hydraulic Bale Pusher Bar (HV10 baler only) Extends to push bale beyond vertical door to allow tie off and ejection of the next bale
  • The HV9 & HV10 balers are manufactured standard with wither left-hand or right-hand hopper and controls
  • 50 HP TEFC Motor, Standard Voltage – 460 Volt, 60 Hertz, 3 Phase
  • Industrial Hardened Logic Controller
  • Hardox® 400 Replaceable Wear Liners
  • 300 Gallon Hydraulic Reservoir with Regenerative Circuit
  • One Year Excel Limited Warranty (Parts & Labor)
  • Tongue and Groove Corrugated Floor
  • NEMA 12 rated Enclosures and Controls on Moveable Pedestal
  • Castle Key Safety Interlocking System
  • Full Bale Chamber Penetration
  • Standard Hopper with Inspection Window
  • Clean Out Tool, Grease Gun, and Extra Spray Paint
  • One Bundle of 12 gauge x 13 ft. Single Loop Wire Ties
  • Paint – Excel Blue
  • Air to Oil Heat Exchanger
  • Lower Photo Eye
  • UL, CUL, CE Approved
  • Available with Excel integrated conveyers with rubber or steel belts for a turn-key system

HV9 SERIES BALERS

STRUCTURAL

AUTOMATIC CLOSED END BALING PRESS

HEIGHT : 62” Loading 52 1/2” Frame (158cm)

LENGTH : 179” (455cm)

WIDTH : 77” (196cm)

CHAMBER : 47”L (119cm) x 60”W (152cm) x 30”H (76cm)

FEED OPENING : 54”W (137cm) x 35”L (89cm)

BALER SHIPPING WEIGHT : 18,760 lbs. (8,509kg) (as shown)

PERFORMANCE DATA

PUMP : 34 gal. (130 liters) Pressure Compensated HorsePower Limited Piston Pump, 4,000 PSI Rated

DIRECTIONAL VALVE : D08 Pattern, Hi-Flow Cushion Shift Design

CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Strokex 4” (10cm) Hard Chrome Rod

OIL RESERVOIR : 105 gal. (399 liters)

DOOR LATCH CYL. : N/A

MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase

ENCLOSUR : NEMA 12 Rated, UL Approved

CONTROLS : UL/CUL/CE Approved, NEMA 12 Rated

HYD SYSTEM PRESSURE : 3,000 PSI (207 BAR)

OVERALL PLATEN FORCE : 159,400 lbs. (72 tonne)

PLATEN PSI : 92 PSI (6.33 BAR)

CYCLE TIME : 46 sec. – 30 sec. Short Stroke

TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

OCC : 1,200 lbs. (544kg) TPH 2.4

MAGAZINES : 2,000 lbs. (907kg) TPH 5

NEWSPAPER : 1,500 lbs. (680kg) TPH 4.5

OFFICE PAPER : 1,600 lbs. (726kg) TPH 4.8

HDPE : 1,100 lbs. (499kg) TPH 1.7

PET : 800 lbs. (363kg) TPH 1.1 (May vary with percent of capped bottles)

ALUMINUM CANS : 625 lbs. (284kg) TPH 1.9

TIN CANS : 1,200 lbs. (544kg) TPH 3

HV9 Series Balers bale the following materials:

  • Office Paper
  • Newspaper
  • OCC
  • Magazines
  • PET
  • HDPE
  • Aluminum Cans
  • Tin Cans
  • Plastic Film
  • Carpet Padding
  • Textiles
  • Other materials

HV10 Series Balers

  • Patented Hydraulic Bale Pusher Bar (HV10 baler only) Extends to push bale beyond vertical door to allow tie off and ejection of the next bale
  • The HV9 & HV10 balers are manufactured standard with wither left-hand or right-hand hopper and controls
  • 50 HP TEFC Motor, Standard Voltage – 460 Volt, 60 Hertz, 3 Phase
  • Industrial Hardened Logic Controller
  • Hardox® 400 Replaceable Wear Liners
  • 300 Gallon Hydraulic Reservoir with Regenerative Circuit
  • One Year Excel Limited Warranty (Parts & Labor)
  • Tongue and Groove Corrugated Floor
  • NEMA 12 rated Enclosures and Controls on Moveable Pedestal
  • Castle Key Safety Interlocking System
  • Full Bale Chamber Penetration
  • Standard Hopper with Inspection Window
  • Clean Out Tool, Grease Gun, and Extra Spray Paint
  • One Bundle of 12 gauge x 13 ft. Single Loop Wire Ties
  • Paint – Excel Blue
  • Air to Oil Heat Exchanger
  • Lower Photo Eye
  • UL, CUL, CE Approved
  • Available with Excel integrated conveyers with rubber or steel belts for a turn-key system

HV10 SERIES BALERS

STRUCTURAL

HEIGHT : 62” Loading 52 1/2” Frame (158cm)

LENGTH : 179” (455cm)

WIDTH : 77” (196cm)

CHAMBER : 47”L (119cm) x 60”W (152cm) x 30”H (76cm)

FEED OPENING : 54”W (137cm) x 35”L (89cm)

BALER SHIPPING WEIGHT : 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

PUMP : 34 gal. (130 liters) Pressure Compensated HorsePower Limited Piston Pump, 4,000 PSI Rated

DIRECTIONAL VALVE : D08 Pattern, Hi-Flow Cushion Shift Design

CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Strokex 4” (10cm) Hard Chrome Rod

OIL RESERVOIR : 105 gal. (399 liters)

DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Strokex 2” (5cm) Rod

MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase

ENCLOSURE : NEMA 12 Rated, UL Approved

CONTROLS : UL/CUL/CE Approved, NEMA 12 Rated

HYD SYSTEM PRESSURE : 3,000 PSI (207 BAR)

OVERALL PLATEN FORCE : 159,400 lbs. (72 tonne)

PLATEN PSI : 92 PSI (6.33 BAR)

CYCLE TIME : 29 sec. – 21 sec. Short Stroke

TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

OCC : 1,200 lbs. (544kg) TPH 3.3

MAGAZINES : 2,000 lbs. (907kg) TPH 7.5

NEWSPAPER : 1,500 lbs. (680kg) TPH 6.4

OFFICE PAPER : 1,600 lbs. (726kg) TPH 6.8

HDPE : 1,100 lbs. (499kg) TPH 2.3

PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)

ALUMINUM CANS : 625 lbs. (284kg) TPH 2.3

TIN CANS : 1,200 lbs. (544kg) TPH 4.5

HV10 Series Balers bale the following materials:

  • Office Paper
  • Newspaper
  • OCC
  • Magazines
  • PET
  • HDPE
  • Aluminum Cans
  • Tin Cans
  • Plastic Film
  • Carpet Padding
  • Textiles
  • Other materials